Looking for Hatch Liner ideas?

[Dave LeGear]

What have y'all used for hatch liners here of late that has held up well while helping keep your items drier and off the bottom of the actual hatch floor?

Was thinking of using a Sea Dek type of material and elected to not go down that route, all that would do is just take up space and not help keep any moisture of my tackle and camera bags and boxes...

Then started looking at Dri-Dek material, but that is pretty expensive from what I am seeing for what it is... And I see some of those slide around inside the bottom of hatches.

As such thus far, what looking at these two products

1. MYOYAY Drainage Anti-Slip Mat that is in a roll, thus you could cut it for a pretty snug fit, but still pull it out to clean it when needed.

More information on that one here: https://www.amazon.com/MYOYAY-Drainage-Anti-Slip-Commercial-Area%EF%BC%88Gray%EF%BC%89/dp/B093L9YQNS
/ref=sr_1_85?dchild=1&keywords=MYOYAY&qid=1632070213&sr=8-85

2. 4pcs Modular Interlocking Cushion, that comes in squares that appears taller than many of those types of products to help hold items higher off the hatch floor...

More info on it here: https://www.amazon.com/dp/B07TMQV29B/ref=cm_sw_em_r_mt_dp_148N3Y5F8G2QH0D5YTX9

3. smabee 24Pcs Interlocking Soft PVC, and the appeal to these was the suction cups to help hold them in place

More information on them here: : https://www.amazon.com/dp/B088VHBRFD/ref=cm_sw_em_r_mt_dp_79HW56DVYQ82M4Y0PAPB

What have you guys and gals used as compared to these and liked?

Thanks much!
Dave

 

[Dunderwood]

This is a picture of my mega hatch on a 2003 210cc. I built a small pallet out of white pvc trim from Home Depot. That way water can flow underneath it if it gets wet, and my stuff on top stays dry. No mold or mildew issues with the PVC boards. I also used stainless screws.

 

[Dunderwood]

This is a picture of my mega hatch on a 2003 210cc. I built a small pallet out of white pvc trim from Home Depot. That way water can flow underneath it if it gets wet, and my stuff on top stays dry. No mold or mildew issues with the PVC boards. I also used stainless screws.

I also built a smaller one for my anchor locker so that water from my anchor line could drain down and evaporate. Keeps my anchor rope dryer.

 

[Dave LeGear]

Thanks David!
Great idea and might be a little tall for the hatch decks on a Skiff, but I like and understand the concept

You should post up some more information and pictures of your awesome work here:
https://www.performanceoutdoors.net/threads/best-of-the-best-210-215-upgrade-ideas.9102/

And let me know if you need any help with it